The Dual Row .050 Micro Strip connectors are configured with simple straight tails (Integral or Crimped). Suitable for vertical thru-hole mounting to fine pitched flex circuits.The straight solid tails are also commonly used in ultra fine wrap terminations, such as electrophysiology. These connectors feature Omnetics’ highly reliable gold plated Flex Pin contact system which meets the performance specifications of MIL-DTL- 83513. Available with fixing/retention jack screws as well as mounting holes suitable for PCB and flex mounting. These connectors are available in standard sizes ranging from 2 through 64 positions as well as customconfigurations. Flex design and installation service is also available from Omnetics. Please contact us for more information.
Additional information
Omnetics Series
DRP, DRS
Rows
2 Rows
Termination Type
DD – Thru-Hole Straight
Electrical Mechanical Specifications
–
Temperature
-55ºC to +125ºC (200 ºC w/HTE)
Dielectric Withstand Voltage
600 VAC RMS Sea Level
Contact Resistance
26 milliohms (65 mV max @ 2.5 AMPs)
Current Rating
3 AMPs per contact
Durability
500 Cycles
Insulation Resistance
5, 000 Megohms min @ 500 VDC
Shock
50 gs with no discontinuities > 1 microsecond
Vibration
20 gs with no discontinuities > 1 microsecond
Thermal Vacuum Outgassing
NASA SP-R-0022
Mating/Unmating Force
Forces not to exceed 6 oz/contact
Material Specifications
–
Insulator
Polyphenylene Sulfide per MIL-M-24519
Socket
Gold Plated Copper Alloy
Encapsulant
Epoxy
Standard Pin PCB Tail Termination
Solder per J-STD-006 (Non-RoHS) or ASTM P-81728
RoHS Pin PCB Tail Termination
Hard gold plate per ASTM B488
RoHS Socket PCB Tail Termination
Hard gold plate per ASTM B488
Features
The Dual Row .050” Micro Strip connectors are configured with simple straight tails (Integral or Crimped). Suitable for vertical thru-hole mounting to fine pitched flex circuits.The straight solid tails are also commonly used in ultra fine wrap terminations, such as electrophysiology. These connectors feature Omnetics’ highly reliable gold plated Flex Pin contact system which meets the performance specifications of MIL-DTL- 83513. Available with fixing/retention jack screws as well as mounting holes suitable for PCB and flex mounting. These connectors are available in standard sizes ranging from 2 through 64 positions as well as customconfigurations. Flex design and installation service is also available from Omnetics. Please contact us for more information.
