MIL-DTL-83513 Connectors

These Micro-D connectors meet or exceed MIL-DTL-83513. Designed to precision and built to to withstand harsh and demanding environments.


M83513/01, M83513.02


- Military/Defense

- Radars

- Aerospace

- Satellites

- Petroleum

- Medical


Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208


* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves