Micro 360® Circular Threaded Panel Mount Straight Thru-Hole

Omnetics micro series of circular connectors are now available with metal housings giving them a environmental seal. They have ability to withstand high shock and vibrations while maintaining electrical integrity. A variety of shell material and finishes are available. Sizes available 5, 7, 12, 16, 27 & 39 .

Electrical Mechanical Specifications
Temperature: -55ºC to 125ºC (200ºC with HTE)
Insulation Resistance: 5000 megohms min @ 500 VDC
Contact Resistance: 26 Milliohm Max (65 mV Drop Max) @ 2.5 AMPs per MIL-DTL-83513
Voltage Rating (DWV) 600 VAC RMS at Sea Level
Shock: 50 g’s with no discontinuties > 1 microsecond     
Vibration: 20 g’s with no discontinuties > 1 microsecond     
Current Rating: 3 AMPs per contact
Mating/Unmating Force: 3 oz (85 g) typical per contact
Sealing: Up to IP67. Consult Factory for more options.
Thermal Vacuum Outgassing:   NASA SP-R-0022
Material Specifications
Shell Material and Finish:   Ni Plated Brass or Black Ni. Contact Factory for other Materials  
Insulator: LCP per MIL-M-24519, Type GLCP-30F
Pin: Beryllium Copper per ASTM B194, Alloy C17200  
Socket: Copper Alloy MIL-DTL-83513
Encapsulant: Epoxy
Standard PC Tail Finish: Solder per J-STD-006 (Non-RoHS)
RoHS PC Tail Finish: Hard gold plate per ASTM B488


 

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves

Micro 360® Circulars Threaded Panel Mount Wired/Cable

Omnetics micro series of circular connectors are now available with metal housings giving them a environmental seal. They have ability to withstand high shock and vibrations while maintaining electrical integrity. A variety of shell material and finishes are available. Sizes available 5, 7, 12, 16, 27 & 39 .Wire Terminations available with Discrete wire and Cable.

Electrical Mechanical Specifications
Temperature: -55ºC to 125ºC (200ºC with HTE)
Insulation Resistance: 5000 megohms min @ 500 VDC
Contact Resistance: 26 Milliohm Max (65 mV Drop Max) @ 2.5 AMPs per MIL-DTL-83513
Voltage Rating (DWV) 600 VAC RMS at Sea Level
Shock: 50 g’s with no discontinuties > 1 microsecond     
Vibration: 20 g’s with no discontinuties > 1 microsecond     
Current Rating: 3 AMPs per contact
Mating/Unmating Force: 3 oz (85 g) typical per contact
Sealing: Up to IP67. Consult Factory for more options.
Thermal Vacuum Outgassing:   NASA SP-R-0022
Material Specifications
Shell Material and Finish:   Ni Plated Brass or Black Ni. Contact Factory for other Materials  
Insulator: LCP per MIL-M-24519, Type GLCP-30F
Pin: Beryllium Copper per ASTM B194, Alloy C17200  
Socket: Copper Alloy MIL-DTL-83513
Encapsulant: Epoxy


 

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves

Micro 360® Circular Threaded Metal Shell

Omnetics micro series of circular connectors are now available with metal housings giving them a environmental seal. They have ability to withstand high shock and vibrations while maintaining electrical integrity. A variety of shell material and finishes are available. Sizes available 5, 7, 12, 16, 27 & 39 .Wire Terminations available with Discrete wire and Cable.

Electrical Mechanical Specifications
Temperature: -55ºC to 125ºC (200ºC with HTE)
Insulation Resistance: 5000 megohms min @ 500 VDC
Contact Resistance: 26 Milliohm Max (65 mV Drop Max) @ 2.5 AMPs per MIL-DTL-83513
Voltage Rating (DWV): 600 VAC RMS at Sea Level
Shock: 50 g’s with no discontinuties > 1 microsecond     
Vibration: 20 g’s with no discontinuties > 1 microsecond     
Current Rating: 3 AMPs per contact
Mating/Unmating Force: 3 oz (85 g) typical per contact
Sealing: Up to IP67. Consult Factory for more options.
Thermal Vacuum Outgassing:  NASA SP-R-0022
Material Specifications
Shell Material and Finish:   Ni Plated Brass or Black Ni. Contact Factory for other Materials  
Insulator: LCP per MIL-M-24519, Type GLCP-30F
Pin: Beryllium Copper per ASTM B194, Alloy C17200  
Socket: Copper Alloy MIL-DTL-83513
Encapsulant: Epoxy


 

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves