Single Row Micro-D Connectors

These Single Row Micro-D connectors are designed to a precision and is built to meet or exceed your solution needs.

     Applications:

  • Military & Defense
  • Aviation
  • Aerospace
  • Satellites & Radars
  •  Petroleum 

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves

Contact Customer Support (1-800-343-0025 / 763-572-0656), or find a Distributor / Representative.
Copyright © 2017 Omnetics Connector Corp. All rights reserved. Terms of Use Privacy Policy
Omnetics Connector Corporation | 7260 Commerce Circle East | Minneapolis MN - 55432