Dual Row Horizontal SMT (AA)

Horizontal SMT Micro Strip connectors offer an extremely low profile package that is well suited to pick and place methods. These connectors feature Omnetics' highly reliable gold plated Flex Pin contact system conforming to the requirements of MIL-DTL-83513. These rugged light weight connectors are suitable for the most demanding applications. Available with mounting holes suitable for PCB and flex mounting. These connectors are available in standard sizes ranging from 2 through 64 positions as well as custom configurations.

Electrical Mechanical Specifications
Temperature: -55ºC to 125ºC (200ºC with HTE)
Durability:     500 Cycles
Insulation Resistance: 5,000 Megohms min @ 500 VDC
Voltage Rating (DWV) 600 VAC RMS Sea Level
Shock: 50 G’s discontinuity < 1 microsecond    
Vibration: 20 G’s discontinuity < 1 microsecond
Thermal Vacuum Outgassing    NASA SP-R-0022
Contact Resistance: 26 milliohms (65 mV max @ 2.5 amp)
Current Rating: 3 amp per contact
Mating/Unmating Force: Forces not to exceed 6 oz/contact
Material Specifications
Insulator Polyphenylene Sulfide per MIL-M-24519
Socket Gold Plated Copper Alloy
Encapsulant Epoxy
Standard Pin PCB Tail Termination:  Solder per J-STD-006 (Non-RoHS)
RoHS Pin PCB Tail Termination: Hard gold plate per ASTM B488
RoHS Socket PCB Tail Termination:  Hard gold plate per ASTM B488

 

 

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves

Dual Row Straight Tail (DD)

The Dual Row .050” Micro Strip connectors are configured with simple straight tails (Integral or Crimped). Suitable for vertical thru-hole mounting to fine pitched flex circuits.The straight solid tails are also commonly used in ultra fine wrap terminations, such as electrophysiology. These connectors feature Omnetics' highly reliable gold plated Flex Pin contact system which meets the performance specifications of MIL-DTL- 83513. Available with fixing/retention jack screws as well as mounting holes suitable for PCB and flex mounting. These connectors are available in standard sizes ranging from 2 through 64 positions as well as customconfigurations. Flex design and installation service is also available from Omnetics. Please contact us for more information.

Electrical Mechanical Specifications
Temperature: -55ºC to 125ºC (200ºC with HTE)
Durability:     500 Cycles
Insulation Resistance: 5,000 Megohms min @ 500 VDC
Voltage Rating (DWV) 600 VAC RMS Sea Level
Shock: 50 G’s discontinuity < 1 microsecond    
Vibration: 20 G’s discontinuity < 1 microsecond
Thermal Vacuum Outgassing    NASA SP-R-0022
Contact Resistance: 26 milliohms (65 mV max @ 2.5 amp)
Current Rating: 3 amp per contact
Mating/Unmating Force: Forces not to exceed 6 oz/contact
Material Specifications
Insulator Polyphenylene Sulfide per MIL-M-24519
Socket Gold Plated Copper Alloy
Encapsulant Epoxy
Standard Pin PCB Tail Termination:  Solder per J-STD-006 (Non-RoHS)
RoHS Pin PCB Tail Termination: Hard gold plate per ASTM B488
RoHS Socket PCB Tail Termination:  Hard gold plate per ASTM B488

 

 

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves

Dual Row Flex Tail (FF)

Flex mount Micro Strip connectors are a low profile ruggedized connector on .050” (1.27 mm) centerlines. The SMT tails are formed together in an hourglass shape, allowing a double sided flex circuit to slide between the 2 rows of leads. The spring tension holds the flex in place during the soldering process. These durable light weight connectors are suitable for the most demanding applications. Available with fixing/ retention jack screws as well as mounting holes suitable for PCB and flex mounting. They feature Omnetics' highly reliable gold plated Flex Pin contact system which meets the performance specifications of MIL-DTL-83513. These connectors are available in standard sizes ranging from 2 through 64 positions as well as custom configurations. Flex design and installation service is also available from Omnetics. Please contact us for more information.

Electrical Mechanical Specifications
Temperature: -55ºC to 125ºC (200ºC with HTE)
Durability:     500 Cycles
Insulation Resistance: 5,000 Megohms min @ 500 VDC
Voltage Rating (DWV) 600 VAC RMS Sea Level
Shock: 50 G’s discontinuity < 1 microsecond    
Vibration: 20 G’s discontinuity < 1 microsecond
Thermal Vacuum Outgassing    NASA SP-R-0022
Contact Resistance: 26 milliohms (65 mV max @ 2.5 amp)
Current Rating: 3 amp per contact
Mating/Unmating Force: Forces not to exceed 6 oz/contact
Material Specifications
Insulator Polyphenylene Sulfide per MIL-M-24519
Socket Gold Plated Copper Alloy
Encapsulant Epoxy
Standard Pin PCB Tail Termination:  Solder per J-STD-006 (Non-RoHS)
RoHS Pin PCB Tail Termination: Hard gold plate per ASTM B488
RoHS Socket PCB Tail Termination:  Hard gold plate per ASTM B488

 

 

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves

Dual Row Short/Long Alt. Thru-Hole (H2)

The Dual Row Micro Strip connectors H2 have contacts arranged on .050” (1.27 mm) centerlines. The thru-hole tails are spread out into a mounting pattern on .050 (1.27 mm) centers, allowing for space for traces and annular rings.These connectors feature Omnetics' highly reliable gold plated Flex Pin contact system which meets the performance specifications of MIL-DTL-83513. These durable light weight connectors are suitable for the most demanding applications. Available with fixing/retention jack screws as well as mounting holes suitable for PCB and flex mounting. These connectors are available in standard sizes ranging from 2 through 64 positions as well as custom configurations.

Electrical Mechanical Specifications
Temperature: -55ºC to 125ºC (200ºC with HTE)
Durability:     500 Cycles
Insulation Resistance: 5,000 Megohms min @ 500 VDC
Voltage Rating (DWV) 600 VAC RMS Sea Level
Shock: 50 G’s discontinuity < 1 microsecond    
Vibration: 20 G’s discontinuity < 1 microsecond
Thermal Vacuum Outgassing    NASA SP-R-0022
Contact Resistance: 26 milliohms (65 mV max @ 2.5 amp)
Current Rating: 3 amp per contact
Mating/Unmating Force: Forces not to exceed 6 oz/contact
Material Specifications
Insulator Polyphenylene Sulfide per MIL-M-24519
Socket Gold Plated Copper Alloy
Encapsulant Epoxy
Standard Pin PCB Tail Termination:  Solder per J-STD-006 (Non-RoHS)
RoHS Pin PCB Tail Termination: Hard gold plate per ASTM B488
RoHS Socket PCB Tail Termination:  Hard gold plate per ASTM B488

 

 

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves

Dual Row Solder Cup (SS)

Donec rutrum congue leo eget malesuada. Vivamus magna justo, lacinia eget consectetur sed, convallis at tellus. Vivamus magna justo, lacinia eget consectetur sed, convallis at tellus. Donec sollicitudin molestie malesuada. Vivamus suscipit tortor eget felis porttitor volutpat. Proin eget tortor risus. Pellentesque in ipsum id orci porta dapibus. Donec rutrum congue leo eget malesuada. Sed porttitor lectus nibh. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Donec velit neque, auctor sit amet aliquam vel, ullamcorper sit amet ligula.

Donec rutrum congue leo eget malesuada. Vivamus magna justo, lacinia eget consectetur sed, convallis at tellus. Vivamus magna justo, lacinia eget consectetur sed, convallis at tellus. Donec sollicitudin molestie malesuada. Vivamus suscipit tortor eget felis porttitor volutpat. Proin eget tortor risus. Pellentesque in ipsum id orci porta dapibus. Donec rutrum congue leo eget malesuada. Sed porttitor lectus nibh. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Donec velit neque, auctor sit amet aliquam vel, ullamcorper sit amet ligula.

Dual Row Verticle SMT (VV)

Vertical SMT Micro Strip connectors require a minimal amount of board space on flex circuits and rigid circuit boards. These connectors feature Omnetics' highly reliable gold plated Flex Pin contact system which meets the performance specifications of MIL-DTL-83513.These rugged light weight connectors are suitable for the most demanding applications. Available with fixing/retention jack screws as well as mounting holes suitable for PCB and flex mounting. These connectors are available in standard sizes ranging from 2 through 64 positions as well as custom configurations.

Electrical Mechanical Specifications
Temperature: -55ºC to 125ºC (200ºC with HTE)
Durability:     500 Cycles
Insulation Resistance: 5,000 Megohms min @ 500 VDC
Voltage Rating (DWV) 600 VAC RMS Sea Level
Shock: 50 G’s discontinuity < 1 microsecond    
Vibration: 20 G’s discontinuity < 1 microsecond
Thermal Vacuum Outgassing    NASA SP-R-0022
Contact Resistance: 26 milliohms (65 mV max @ 2.5 amp)
Current Rating: 3 amp per contact
Mating/Unmating Force: Forces not to exceed 6 oz/contact
Material Specifications
Insulator Polyphenylene Sulfide per MIL-M-24519
Socket Gold Plated Copper Alloy
Encapsulant Epoxy
Standard Pin PCB Tail Termination:  Solder per J-STD-006 (Non-RoHS)
RoHS Pin PCB Tail Termination: Hard gold plate per ASTM B488
RoHS Socket PCB Tail Termination:  Hard gold plate per ASTM B488

 

 

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves

Dual Row Pre-Wired (WD)

Pre-wired Single Row Micro Strip are available with 26 AWG and smaller stranded wire. These assemblies are crimped using proprietary semi-automated crimping systems. Due to their small size and precision required to make these quality crimps, hand crimping is not an option. Pre-crimped wires and contacts are potted in place further protecting the integrity of the crimp joint. Building these parts to order allows for maximum flexibility in wire type, size and color coding. Commercial Off The Shelf (COTS) versions are also available with 18” of color coded 26 AWG Teflon wire for quick turn around. These connectors are available in standard sizes ranging from 2 through 64 positions as well as custom configurations, and accept 26 AWG or smaller stranded wire.

Electrical Mechanical Specifications
Temperature: -55ºC to 125ºC (200ºC with HTE)
Durability:     500 Cycles
Insulation Resistance: 5,000 Megohms min @ 500 VDC
Voltage Rating (DWV) 600 VAC RMS Sea Level
Shock: 50 G’s discontinuity < 1 microsecond    
Vibration: 20 G’s discontinuity < 1 microsecond
Thermal Vacuum Outgassing    NASA SP-R-0022
Contact Resistance: 26 milliohms (65 mV max @ 2.5 amp)
Current Rating: 3 amp per contact
Mating/Unmating Force: Forces not to exceed 6 oz/contact
Material Specifications
Insulator Polyphenylene Sulfide per MIL-M-24519
Socket Gold Plated Copper Alloy
Encapsulant Epoxy
Standard Pin PCB Tail Termination:  Solder per J-STD-006 (Non-RoHS)
RoHS Pin PCB Tail Termination: Hard gold plate per ASTM B488
RoHS Socket PCB Tail Termination:  Hard gold plate per ASTM B488

 

 

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

This PDF requires the free Adobe Reader.

Click here to dowload the Adobe Reader

Tested to and passed the following performance specifications of MIL-DTL-83513

Current Rating: 3 amps max
Dielectric Withstanding Voltage  600 VAC RMS
Insulation Resistance: 5000 megohms @ 500 VDC
Contact Resistance 26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force Forces not to exceed 10 oz/contact   
Temperature Cycling -55ºC to 125ºC, 5 Cycles
Humidity Mated    IAW EIA-364-31, Method IV, Omit Steps 7A & 7B
Vibration IAW EIA-364-28, Condition IV
Mechanical Shock: IAW EIA-364-27, Condition E
Durability 500 cycles
Contact Resistance after Durability  26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability: Forces not to exceed 6 oz/contact      
Salt Spray: 48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:  28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray: 28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray: Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray: Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing: NASA SP-R-0022
Solder Heat & Contact 360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Retention: 5 lbs retention force
Solder ability: MIL-STD-202, Method 208

 

* Currently Qualified To MIL-DTL-83513 01/02/03/04 Specifications
* Forces as measured using minimum and maximum diameter test sleeves

Contact Customer Support (1-800-343-0025 / 763-572-0656), or find a Distributor / Representative.
Copyright © 2017 Omnetics Connector Corp. All rights reserved. Terms of Use Privacy Policy
Omnetics Connector Corporation | 7260 Commerce Circle East | Minneapolis MN - 55432